Medium Power Converters Section

Tag: FGC3

  • REF.ECONOMY.DEST.MODE

    REF.ECONOMY.DEST.MODE

    1) Put converter in OFF or BK state: S PC BK 2) Disable this property to disable the destination-based economy mode: S REF.ECONOMY.DEST.MODE DISABLED In the SPS there exists another economy mode that can be disabled in this way: S REF.ECONOMY.MODE DISABLED 3) Put converter in CYCLING S PC CY Yellow pages link to property:

    Explore →

  • LOAD.I_SAT_GAIN

    LOAD.I_SAT_GAIN

    Read also the yellow pages reference and the FGC block diagram This needs to be set to 1 if we want the saturation model to be taken into account.

    Explore →

  • DSP HEX switches

    DSP HEX switches

    The HEX1 and HEX2 switches are decided based on the following rule that combines the converter information and switching frequency information into one Hex code: 2^(TypeNum) x (Fsw,H-bridge + Fsw,boost) For example for SIRIUS S with type number=10: 2^(10) x (6500+13000)=2.00E+7 (rounded up) Hex 2 is defined by the decade (=7), Hex 1 by the

    Explore →

  • FGC stack in synchronisation mode

    FGC stack in synchronisation mode

    This happens when one of the post-mortem services is not available and hence the FGC3 remains in post-mortem generation mode. You can reset this by typing the following command:

    Explore →

  • POCPA 2018 – Standard FGC3 control platform at CERN

    POCPA 2018 – Standard FGC3 control platform at CERN

    POCPA 2018 – Standard FGC3 control platform at CERN Author DAVIDE AGUGLIA Year 2018-01-01 Link https://edms.cern.ch/document/2029841 EDMS 2029841

    Explore →