Tag: configuration
-
Play RAMP function
To play a ramp function on user 2, once every 04 cycles (period 4.8s) load the following configuration file:
-
Play a PULSE function
A slow ramp to IOP,max can be used to obtain the converter inductance with respect to current.
-
Synchronisation with Database
The FGC configuration is stored in the Configuration Database that is maintened by the CCS section. Each time the converter electronics boot they download the latest saved configuration. Useful commands
-
FAST_POWER_ABORT
The fault is related to the signals arriving at the SKSYSINTL. There are two pairs of pins that matter, one is typically connected to the WIC system and the second is the PC_PERMIT that is mostly bridged inside the connector, in case of sirius. This fault originates from the *State machine card*(?) Powering Interlock Controller
-
Technical Description for the design, production, testing and supply of Thyristor bridges used in six-pulse configuration
Technical Description for the design, production, testing and supply of Thyristor bridges used in six-pulse configuration Author Gilles LE GODEC Year 2009-01-01 Link https://edms.cern.ch/edmsui/#!master/navigator/document?D:1876474896:1876474896:subDocs EDMS 1007053
-
Technical Questionnaire for the design, production, testing and supply of thyristor bridges used in six-pulse configuration
Technical Questionnaire for the design, production, testing and supply of thyristor bridges used in six-pulse configuration Author Gilles LE GODEC Year 2009-01-01 Link https://edms.cern.ch/edmsui/#!master/navigator/document?D:1167226891:1167226891:subDocs EDMS 1007062